FUSION ARMS XP PRO 4'' BARREL

DPM Mechanical Recoil Reduction System for FUSION ARMS XP PRO 4'' BARREL

The DPM Mechanical Recoil Reduction Rod is a direct replacement for the stock recoil rod and does not change the configuration of the pistol. 

The external springs are different in length, the long spring is heavy and the short is light so the shooter can fine tune the pistol on the opening and locking positions (slide on the battery).

Within the kit are included 4 different in length and strength external springs, the 2 gold coated springs have 1.05 mm  wire diameter and are softer during the slide travel, than the 2 silver coated springs with wire diameter  1.1 mm.

**As we lead the evolution of recoil reduction technology, products may change versions (new design with different springs, with or without plugs, washers, etc.) without any prior notice.**  

The captive (closed-coil) end of the spring must always be placed against the guide rod. 

Power rates

Slide in the battery (idle position)

• Gold Short Spring 1.05mm: 7.5  lbs
• Gold Long Spring 1.05mm:  8.15 lbs  

• Silver Short Spring 1.1mm: 7.7 lbs
• Silver Long Spring 1.1mm: 8.3  lbs

Slide at full open position

• Gold Short Spring 1.05mm: 13.2  lbs
• Gold Long Spring 1.05mm: 14.10 lbs     

• Silver Short Spring 1.1mm: 15.4 lbs
• Silver Long Spring 1.1mm: 16.5  lbs

Overall Advantages

• Faster follow up shots
• Improved firing speed
• Slide and Frame Protection
• Elimination of jams
• Significant recoil reduction
• Better double-tap concentration
• Better control and greater accuracy

Lifetime Warranty.  

Made in Greece – EU.