Sig Sauer P320-XTEN 10mm 5" Barrel (Heavy Duty)
This specific Mechanical Recoil Reduction System is special made to serve the 10mm and +P+ ammo , also offers an extended range of adjustability with 9 different power rates combinations. As always, DPM products are designed and developed with user’s safety as a priority. Exceptional manufacturing and engineering using high-end materials.
9 User Settings
*B.O.S.S: Black Oxide Stainless Steel its an innovative coating technology applied usually on the visible parts of the recoil system.
- 80.65€ + TAX
DPM Mechanical Recoil Reduction System for Sig Sauer P320-XTEN 10mm 5" Barrel
The Mechanical Recoil Rod Reducer System is a direct replacement for the stock recoil rod and does not change the configuration of the gun.
This system works due to the multi spring intricate rod (3 springs) and controls the functionality of the pistol. The third spring which is contained within the rod controls the movement of the slide so it never rams on the frame.
Also included with the system are 3 Spring Plugs and 3 External Springs so the user can fine-tune the weapon for his/hers personal standards. The longer spring (more coils) is stronger and has a heavier pound rating than the shorter spring. The Spring Plugs because of the different length change the total force of the recoil system (slide full open position).
The Spring Plug must always be installed when the DPM Recoil Rod and Springs are used.
Slide on the battery (idle position)
- Short: 3.7 kg / 8.3 lbs
- Medium: 4.1 kg / 9 lbs
- Long: 4.4kg / 9.7 lbs
Total power (slide full open position)
- Short Plug: 20 lbs approx.
- Medium Plug: 24 lbs approx.
- Long Plug: 28 lbs approx.
- Faster follow up shots
- Improved firing speed
- Slide and Frame Protection
- Elimination of jams
- Significant recoil reduction
- Better double-tap concentration
- Better control and greater accuracy
For changes to features, like comp set-up, threaded barrels, slide conversions etc., contact us via email at [email protected] before placing your order. In some cases, we need to determine whether a custom product is required.
Made in Hellas – EU.