DPM MECHANICAL RECOIL REDUCTION SYSTEM
The Mechanical Recoil Rod Reducer System is a direct replacement for the stock recoil rod and does not change the configuration of the gun.
This DPM System works with 6 different buffer recoil springs which each one offers different spring force (forces are listed at the end of the description).
The System includes 3 external springs, 6 buffer recoil springs and 1 safety pin.
The longer spring (more coils) is stronger and has a heavier pound rating than the shorter spring.
Short = 8.0 kg/ 17 lbs
Medium = 9 kg/ 20 lbs
Long = 10 kg/ 22 lbs
Short = 9.0 kg/ 20 lbs
Medium = 10.5 kg/ 23 lbs
Long = 11.5 kg/ 26 lbs
Suggestion: For low power (very soft ammunition) its not essential to use any of the Buffer Springs.
In that case the System in full open position offers 7 kgs/ 15 lbs total force.
For Power Combinations Table click here
Feel free to try any possible combination of the external and buffer springs to fine tune the pistol function depending the power of the ammunition is used and according to your personal standards.
- Faster follow up shots
- Improved firing speed
- Slide and Frame Protection
- Elimination of jams
- Significant recoil reduction
- Better double-tap concentration
- Better control and greater accuracy