FUSION FIREARMS XP PRO 4'' BARREL

DPM Mechanical Recoil Reduction System for FUSION ARMS XP PRO 4'' BARREL

The DPM Mechanical Recoil Reduction Rod is a direct replacement for the stock recoil rod and does not change the configuration of the pistol. 

Within the kit are included 4 different in length and strength external springs, the 2 silver springs have 1.05 mm  wire diameter and are softer during the slide travel, than the 2 black springs with wire diameter  1.1 mm.

**As we lead the evolution of recoil reduction technology, products may change versions (new design with different springs, with or without plugs, washers, etc.) without any prior notice.**  

The captive (closed-coil) end of the spring must always be placed against the guide rod. 

Power rates

Slide in the battery (idle position)

• Silver Short Spring 1.05mm: 7.5lb
• Silver Long Spring 1.05mm:  8.15lb  

• Black Short Spring 1.1mm: 7.7lb
• Black Long Spring 1.1mm: 8.3lb

Slide in full open position

• Silver Short Spring 1.05mm: 13.2lb
• Silver Long Spring 1.05mm: 14.10lb     

• Black Short Spring 1.1mm: 15.4lb
• Black Long Spring 1.1mm: 16.5lb

Overall Advantages

• Faster follow up shots
• Improved firing speed
• Slide and Frame Protection
• Elimination of jams
• Significant recoil reduction
• Better double-tap concentration
• Better control and greater accuracy

Lifetime Warranty.  

Made in Greece – EU.