DPM "SOFT VERSION" FOR GLOCK MODELS: 19-23-25-32-38 GENS: 1-2-3

DPM Mechanical Recoil System for GLOCK 19-23-25-32-38 GENS 1-3 SOFT VERSION

The DPM Recoil Reduction Rod Soft Version is Designed to serve any comp, ported slides & threaded barrels. Also it is compatible for low power ammunition.

This system works due to the multi spring intricate rod (3 springs) and controls the functionality of the gun. The third spring which is contained within the rod controls the movement of the slide so it never rams on the frame.

The system includes 5 external springs, 2 x 1.0 mm wire diameter (long set) and 3 x 1.05mm wire diameter (shorter set), all with different power rates.

**As we lead the evolution of recoil reduction technology, products may change versions (new design with different springs, with or without plugs, washers, etc.) without any prior notice.**

The long set (1.0mm WD) is softer than the short set (1.05mm WD), following below are their power rates table.

Power Rates

Soft Springs 1.0mm (long set)

Slide on the battery 

Short Spring:  3.5 kg / 7.7 lbs

Long Spring: 3.9 kg / 8.6 lbs    

Harder Springs 1.05 mm (short set)

 Slide on the battery 

Short: 4 kg / 8.8 lbs

Medium:   4.4 kg / 9.7 lbs

Long: 4.7 kg / 10.3 lbs  

Slide full open position

Total: 7  kg / 15.5 lbs (approx.)

Overall Advantages 

• Faster follow up shots
• Improved firing speed
• Slide and Frame Protection
• Elimination of jams
• Significant recoil reduction
• Better double-tap concentration
• Better control and greater accuracy

Millions of our patented products are in service to military, law enforcement, sports and civilian firearms around the world.

Lifetime Warranty.  

How it works

Made in Greece - EU.

DISCLAIMER:  This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols . 

• E-shop / Recoil Reduction Systems for Pistols / Glock