CZ 75 P-07 Duty Version 1 & 2

DPM Mechanical Recoil Reduction System for CZ 75 P07 Duty Version 1 & 2

The Mechanical Recoil Reduction System is a direct replacement for the stock recoil rod and does not change the configuration of the pistol. 

This system works due to the multi spring intricate rod (3 springs) and controls the functionality of the pistol. The third spring which is contained within the rod controls the movement of the slide so it never rams on the frame.

Included with the system is one *spring plug and two external springs, allowing the user to fine-tune the weapon to their personal preferences. The longer spring (with more coils) provides greater strength and a higher pound rating than the shorter spring.

ATTENTION:

*The spring plug must always be installed with the DPM System ONLY in Version 2 model.

To identify which P-07 version you own (1 or 2), insert the DPM guide rod from the front side of the slide and if it stops to the first flange, then you have the Version 1 where you should not install the spring plug. 

If the DPM guide rod pass through to the end of it, then you have the Version 2 where installing the Spring Plug is mandatory. 

**As we lead the evolution of recoil reduction technology, products may change versions (new design with different springs, with or without plugs, washers, etc.) without any prior notice.** 

Spring Force (measured in pounds) 

Slide in battery

• Short Spring: 10 lb
• Long Spring: 11 lb

Slide fully open: 24 lb (approx.)

Overall Advantages

• Faster follow up shots
• Improved firing speed
• Slide and Frame Protection
• Elimination of jams
• Significant recoil reduction
• Better double-tap concentration
• Better control and greater accuracy

Made in Greece - EU.

How it works

• E-shop / Recoil Reduction Systems for Pistols / CZ