CANIK TP9 SFx 5.2" Barrel

DPM Mechanical Recoil Reduction System for DPM CANIK TP9 SFx 5.2" Barrel

The DPM Mechanical Recoil Reduction System is a direct replacement for the stock recoil rod and does not change the configuration of the pistol. 

This system works due to the multi spring intricate rod (3 springs) and controls the functionality of the pistol. The third spring which is contained within the rod controls the movement of the slide so it never rams on the frame.

The spring plug must always be installed when the DPM Recoil Rod and springs are used. 

**As we lead the evolution of recoil reduction technology, products may change versions (new design with different springs, with or without plugs, washers, etc.) without any prior notice.** 

Spring Force (measured in pounds) 

Soft Springs 1.05mm  (long set)

Slide on the battery with Short Plug

• Short Spring: 3.5 kg / 7.7lb
• Long Spring: 3.8 kg / 8.4lb

 Slide on the battery with Long Plug

• Short Spring: 3.7 kg / 8.1lb
• Long Spring: 3.8 kg / 8.8lb

Standard Springs 1.10 mm  (short set)

Slide on the battery with Short Plug

• Short Spring:  3.5 kg / 7.7lb
• Long Spring: 3.8 kg / 8.4lb  

 Slide on the battery with Long Plug

• Short Spring:  3.8 kg / 8.4lb
• Long Spring: 4.2 kg / 9.3lb

Total force (approx.) – Slide full open position:

• Short Plug: 21lb
• Long Plug: 24lb

Overall Advantages

• Faster follow up shots
• Improved firing speed
• Slide and Frame Protection
• Elimination of jams
• Significant recoil reduction
• Better double-tap concentration
• Better control and greater accuracy 

How it works

Made in Greece – EU.

• E-shop / Recoil Reduction Systems for Pistols / Canik